4. Install the following components:
a)
b)
c)
5. Follow the procedure in
After working inside your computer
.
WLAN card
Removing the WLAN card
1. Follow the procedure in
Before working inside your computer
.
2. Remove the following components:
a)
b)
c)
3. To remove the WLAN card shield:
a) Remove the two screws (M2x2.5) that secure the WLAN card shield to the system board [1].
b) Remove the WLAN card shield from the system board [2].
Removing and Installing components
35
Summary of Contents for OptiPlex 5270 All-in-One
Page 1: ...Dell OptiPlex 5270 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 54: ...4 Pry and lift the base cover off the middle frame 54 Removing and Installing components ...
Page 58: ...b Slide the PSU and lift it away from the chassis 58 Removing and Installing components ...
