2. To install the hard drive assembly:
a) Place the hard drive assembly into the slot [1].
b) Slide it to lock the blue tab on the hard drive assembly to the metal tab on the display assembly base [2].
3. Install the following components:
a)
b)
4. Follow the procedure in
After working inside your computer
.
Memory module
Removing the memory module
1. Follow the procedure in
Before working inside your computer
.
2. Remove the following components:
Removing and Installing components
25
Summary of Contents for OptiPlex 5270 All-in-One
Page 1: ...Dell OptiPlex 5270 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 54: ...4 Pry and lift the base cover off the middle frame 54 Removing and Installing components ...
Page 58: ...b Slide the PSU and lift it away from the chassis 58 Removing and Installing components ...