Attaching the Mounting Brackets
The switch is shipped with static rails mounting brackets (rack ears) and the required screws for rack or
cabinet installation. The brackets are enclosed in a package with the chassis.
Attaching the Static-Rails Mounting Brackets
1.
Take the static-rail mounting brackets and screws out of their packaging.
2.
Attach the brackets to the I/O side of the chassis, using eight screws for each bracket.
Attach the bracket so that the “ear” faces to the I/O side and the outside of the chassis.
1.
Utility side of the chassis
2. Screws
3. Static-rail mounting bracket
Installing the Dell Static Rails System
Dell Networking provides the Static Rails rack mounting system so you can easily configure a rack to
install the switch.
Identifying the Rail Kit Contents
Locate the components for installing the rail kit assembly:
• Two Dell Static Rails assemblies (1) (2).
NOTE: Supports rack length between 24 and 36 inches.
20
Z9500 Installation
