Wireless Sniffer Board: Dell XPS M1330 Service Manual
file:///C|/Users/SIIES/Downloads/Dell XPS 1330/sniffer.htm#wp1000550[16/07/2010 06:29:01 p.m.]
Back to Contents Page
Wireless Sniffer Board
Dell™ XPS™ M1330 Service Manual
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
Handle components and cards by their edges, and avoid touching pins and contacts.
1. Follow the instructions in
Before You Begin
.
2. Remove any installed ExpressCards from the ExpressCard slot.
3. Remove the palm rest (see
Palm Rest
).
4. Remove the express card cage (see
ExpressCard Reader
5. Disconnect the wireless sniffer board cable from the system board.
6. Remove the two M2 x 3-mm screws from each side of the sniffer board and remove it from the computer base.
1 wireless sniffer board cable connector
2 M2 x3-mm screws (2) 3 wireless sniffer board
Back to Contents Page
