Display Assembly: Dell XPS M1330 Service Manual
file:///C|/Users/SIIES/Downloads/Dell XPS 1330/display.htm#wp1109848[16/07/2010 06:28:06 p.m.]
Back to Contents Page
Display Assembly
Dell™ XPS™ M1330 Service Manual
Removing the Display Assembly
Replacing the Display Assembly
Removing the Display Bezel
Replacing the Display Bezel
Removing the Display Panel
Replacing the Display Panel
Removing the Display Panel Cable
Removing the Display Hinges
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as a connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery from the battery bay before you
begin working inside the computer.
Removing the Display Assembly
1. Follow the instructions in
Before You Begin
.
2. Remove the hinge covers and center control cover (see
Hinge Covers and Center Control Cover
).
3. Remove the Mini Card cables from the Mini Cards if applicable (see
Wireless Mini Cards
).
4. Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from their routing guides.
5. Remove the two M2.5 x 5-mm screws labeled "D" from the computer base.
