Memory : Dell XPS M1330 Service Manual
file:///C|/Users/SIIES/Downloads/Dell XPS 1330/memory.htm#wp1180190[16/07/2010 06:25:51 p.m.]
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as a connector on the back of the computer).
1. Align the notch in the module edge connector with the tab in the connector slot.
2. Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you
do not feel the click, remove the module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer may not boot. No error message indicates this
failure.
1
tab
2
notch
NOTICE:
If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage
your computer.
3. Replace the module cover.
4. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.
5. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start
®
Help and Support
®
Dell System
Information.
Back to Contents Page
