Dell M1330 - XPS - Core 2 Duo 1.83 GHz Service Manual Download Page 1

Page: 1 / 54

Dell XPS M1330 Service Manual

file:///C|/Users/SIIES/Downloads/Dell XPS 1330/index.htm[16/07/2010 06:23:34 p.m.]

Dell™ XPS™ M1330 Service Manual

Before You Begin

Internal Card With Bluetooth® Wireless Technology

Hard Drive

Memory

Coin-Cell Battery

Hinge Covers and Center Control Cover

Keyboard

Communication Cards

Display Assembly

LCD Camera (optional)

Palm Rest

Wireless Sniffer Board

Optical Drive

ExpressCard Reader

Processor Thermal-Cooling Assembly

Processor

Speaker

System Board

Flashing the BIOS

Pin Assignments for I/O Connectors

Model PP25L

Notes, Notices, and Cautions

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and XPS are trademarks of Dell Inc.;Bluetooth is a registered trademark owned by Bluetooth

SIG, Inc. and is used by Dell under license. Intel, Pentium, and Celeron are registered trademarks of Intel Corporation; Microsoft, Windows, and

Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

July 2007 Rev. A00

Summary of Contents for M1330 - XPS - Core 2 Duo 1.83 GHz























































Search results

Summary of Contents for M1330 - XPS - Core 2 Duo 1.83 GHz

Reviews:

Related manuals for M1330 - XPS - Core 2 Duo 1.83 GHz

Brands by name

Popular brands

Dell M1330 - XPS - Core 2 Duo 1.83 GHz, Service Manual

Search results

Summary of Contents for M1330 - XPS - Core 2 Duo 1.83 GHz

Reviews:

Related manuals for M1330 - XPS - Core 2 Duo 1.83 GHz

Brands by name

Popular brands