Dell Latitude XT3 Owner'S Manual Download

Page: 143 / 147

Performance

default. Allows you to enable or disable multi-core support
for the processor. The options are:

•

All (Default Setting)

•

Intel SpeedStep

Allows you to enable or disable the Intel SpeedStep feature.
Default Setting: Enable Intel SpeedStep

C States Control

Allows you to enable or disable the additional processor
sleep states.
Default Setting: The options C states, C3, C6, Enhanced C-

states and C7 options are enabled.

Limit CPUID

Allows you to limit the maximum value the processor
Standard CPUID Function will support.
Default Setting: Enable CPUID

Intel TurboBoost

Allows you to enable or disable the Intel TurboBoost mode of
the processor.
Default Setting: Enable Intel TurboBoost

Hyper-Thread Control

Allows you to enable or disable the HyperThreading in the
processor.
Default Setting: Enabled

Power Management

AC Behavior

Allows you to enable or disable the computer from turning on
automatically when an AC adapter is connected.
Default Setting: Wake on AC is not selected.

Auto On Time

Allows you to set the time at which the computer must turn
on automatically. The options are:

•

Disabled (Default Setting)

•

Every Day

•

Weekdays

USB Wake Support

Allows you to enable USB devices to wake the system from
Standby.

143

Summary of Contents for Latitude XT3




















































































































































Search results

Summary of Contents for Latitude XT3

Reviews:

Related manuals for Latitude XT3

Brands by name

Popular brands

Dell Latitude XT3, Owner'S Manual

Search results

Summary of Contents for Latitude XT3

Reviews:

Related manuals for Latitude XT3

Brands by name

Popular brands