Dell Latitude XT3 Owner'S Manual Download

Page: 137 / 147

System Setup

Overview

System Setup allows you to:

•

change the system configuration information after you add, change, or remove any

hardware in your computer.

•

set or change a user-selectable option such as the user password.

•

read the current amount of memory or set the type of hard drive installed.

CAUTION: Unless you are an expert computer user, do not change the settings for

this program. Certain changes can cause your computer to work incorrectly.

Entering System Setup

Turn on (or restart) your computer.

When the blue DELL logo is displayed, you must watch for the F2 prompt to appear.

Once the F2 prompt appears, press <F2> immediately.

NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt
can appear very quickly, so you must watch for it to display, and then press
<F2> . If you press <F2> before you are prompted, this keystroke will be lost.

If you wait too long and the operating system logo appears, continue to wait until

you see the Microsoft Windows desktop. Then, shut down your computer and try

again.

System Setup Options

NOTE: Depending on the computer and its installed devices, the items listed in this
section may or may not appear.

137

Summary of Contents for Latitude XT3




















































































































































Search results

Summary of Contents for Latitude XT3

Reviews:

Related manuals for Latitude XT3

Brands by name

Popular brands

Dell Latitude XT3, Owner'S Manual

Search results

Summary of Contents for Latitude XT3

Reviews:

Related manuals for Latitude XT3

Brands by name

Popular brands