Dell Latitude XT3 Owner'S Manual Download Page 142

Page: 142 / 147

Security

If disabled the setup options are locked by the admin
password.

TPM Security

Allows you to enable the Trusted Platform Module (TPM)
during POST.
Default Setting: The option is disabled.

Computrace

Allows you to activate or disable the optional Computrace
software The options are:

•

Deactivate (Default Setting)

•

Disable

•

Activate

NOTE: The Activate and Disable options will
permanently activate or disable the feature and no
further changes will be allowed

CPU XD Support

Allows you to enable the Execute Disable mode of the
processor.
Default Setting: Enable CPU XD Support

OROM Keyboard
Access

Allows you to set an option to enter the Option ROM
Configuration screens using hotkeys during boot. The
options are:

•

Enable (Default Setting)

•

One Time Enable

•

Disable

Signed Firmware
Update

Allows you to verify if the firmware updates are digitally
signed.
Default Setting: Disabled

Admin Setup Lockout

Allows you to prevent users from entering Setup when an
Administrator password is set.
Default Setting: Disabled

Performance

Multi Core Support

This field specifies whether the process will have one or all
cores enabled. The performance of some applications will
improve with the additional cores. This option is enabled by

142

Summary of Contents for Latitude XT3




















































































































































Search results

Summary of Contents for Latitude XT3

Reviews:

Related manuals for Latitude XT3

Brands by name

Popular brands

Dell Latitude XT3, Owner'S Manual

Search results

Summary of Contents for Latitude XT3

Reviews:

Related manuals for Latitude XT3

Brands by name

Popular brands