Dell Latitude E6220 Owner'S Manual Download

Page: 2 / 114

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your

computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or

death.

Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.
Trademarks used in this text: Dell

™

, the DELL logo, Dell Precision

™

, Precision ON

™

,ExpressCharge

™

Latitude

™

, Latitude ON

™

, OptiPlex

™

, Vostro

™

, and Wi-Fi Catcher

™

are trademarks of Dell Inc.

Intel

, Pentium

, Xeon

, Core

™

, Atom

™

, Centrino

, and Celeron

are registered trademarks or

trademarks of Intel Corporation in the U.S. and other countries. AMD

is a registered trademark and

AMD Opteron

™

, AMD Phenom

™

, AMD Sempron

™

, AMD Athlon

™

, ATI Radeon

™

, and ATI FirePro

™

are trademarks of Advanced Micro Devices, Inc. Microsoft

, Windows

, MS-DOS

, Windows Vista

the Windows Vista start button, and Office Outlook

are either trademarks or registered trademarks of

Microsoft Corporation in the United States and/or other countries. Blu-ray Disc

™

is a trademark owned

by the Blu-ray Disc Association (BDA) and licensed for use on discs and players. The Bluetooth

word

mark is a registered trademark and owned by the Bluetooth

SIG, Inc. and any use of such mark by Dell

Inc. is under license. Wi-Fi

is a registered trademark of Wireless Ethernet Compatibility Alliance, Inc.

Other trademarks and trade names may be used in this publication to refer to either the entities

claiming the marks and names or their products, Dell Inc. disclaims any proprietary interest in

trademarks and trade names other than its own.

2011 — 07

Summary of Contents for Latitude E6220



















































































































Search results

Summary of Contents for Latitude E6220

Reviews:

Related manuals for Latitude E6220

Brands by name

Popular brands

Dell Latitude E6220, Owner'S Manual

Search results

Summary of Contents for Latitude E6220

Reviews:

Related manuals for Latitude E6220

Brands by name

Popular brands