Dell Latitude E5570 Owner'S Manual Download

Page: 39 / 60

Option

Description

Computrace

Allows you to activate or disable the optional Computrace software The options
are:

• Deactivate
• Disable
• Activate

NOTE: The Activate and Disable options will permanently activate or disable
the feature and no further changes will be allowed

Default setting: Deactivate

CPU XD Support

Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)

OROM Keyboard
Access

Allows you to set an option to enter the Option ROM Configuration screens using
hotkeys during boot. The options are:

• Enable
• One Time Enable
• Disable

Default setting: Enable

Secure Boot screen options

Option

Description

Secure Boot
Enable

This option enables or disables the

Secure Boot

feature.

• Disabled
• Enabled

Default setting: Enabled.

Expert Key
Management

Allows you to manipulate the security key databases only if the system is in Custom
Mode. The

Enable Custom Mode

option is disabled by default. The options are:

• PK
• KEK
• db
• dbx

If you enable the

Custom Mode

, the relevant options for

PK, KEK, db, and dbx

appear. The options are:

•

Save to File

—Saves the key to a user-selected file

Summary of Contents for Latitude E5570





























































Search results

Summary of Contents for Latitude E5570

Reviews:

Related manuals for Latitude E5570

Brands by name

Popular brands

Dell Latitude E5570, Owner'S Manual

Search results

Summary of Contents for Latitude E5570

Reviews:

Related manuals for Latitude E5570

Brands by name

Popular brands