manualshive.com logo in svg

Dell Latitude E5530, Owner'S Manual

Share
Download
Dell Latitude E5530 Owner'S Manual Download Page 76

Option

Description

• By Numlock

Mouse/Touchpad

Allows you to define how the system handles mouse and touch pad 
input. The options are:

• Serial Mouse
• PS2 Mouse
• Toushpad/PS-2 Mouse: This option is enabled by default.

Numlock Enable

Allows you to enable the Numlock option when the computer boots.
Default Setting: Enable Network

Fn Key Emulation

Allows you to set the option where the <Scroll Lock> key is used to 
simulate the <Fn> key feature.
Default Setting: Enable Fn Key Emulation

POST HotKeys

Allows you enable the sign-on screen message display indicating the 
keystroke sequence to access the System Setup option menu.
Default Setting: Enable F12 Boot Option Menu

Table 22. Virtualization Support

Option

Description

Virtualization

Allows you to enable or disable the Intel Virtualization Technology.
Default Setting: Enable Intel Virtualization Technology

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the 
additional hardware capabilities provided by Intel

®

 Virtualization 

technology for direct I/O.
Enable VT for Direct I/O — This option is enabled by default.

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor 
(MVMM) can utilize the additional hardware capabilities provided by Intel 
Trusted Execution Technology. The TPM virtualization Technology, and 
Virtualization technology for direct I/O must be enabled to use this 
feature.
Trusted Execution — disabled by default.

Table 23. Wireless

Option

Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless 
switch. The options are:

• WWAN
• WLAN
• Bluetooth

All the options are enabled by default.

Wireless Device Enable

Allows you to enable or disable the internal wireless devices.

76

Summary of Contents for Latitude E5530


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands