manualshive.com logo in svg

Dell Latitude E5530, Owner'S Manual

Share
Download
Dell Latitude E5530 Owner'S Manual Download Page 72

Option

Description

• Level is 50%
• Level is 75%
• Level is 100%

Miscellaneous Devices

Allows you to enable or disable the following devices:

• Enable Internal Modem
• Enable Microphone
• Enable eSATA Ports
• Enable Hard Drive Free Fall Protection
• Enable Fixed Bay
• Enable Express card
• Enable Camera

NOTE: All devices are enabled by default.

You can also enable or disable Media Card.

Table 17. Video

Option

Description

LCD Brightness

Allows you to set the display brightness depending up on the power 
source (On Battery and On AC).

NOTE: The Video setting will only be visible when a video card is installed into the system.

Table 18. Security

Option

Description

Admin Password

Allows you to set, change, or delete the administrator (admin) password.

NOTE: You must set the admin password before you set the system 
or hard drive password. Deleting the admin password automatically 
deletes the system password and the hard drive password.

NOTE: Successful password changes take effect immediately.

Default Setting: Not set

System Password

Allows you to set, change or delete the system password.

NOTE: Successful password changes take effect immediately.

Default Setting: Not set

Internal HDD-0 Password

Allows you to set or change the system's internal hard-disk drive.

NOTE: Successful password changes take effect immediately.

Default Setting: Not set

Strong Password

Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.

72

Summary of Contents for Latitude E5530


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands