Dell Latitude E5530 Owner'S Manual Download

Page: 70 / 81

Option

Description

• Device Information: Displays Primary Hard Drive, Fixed bay Device,

System eSATA Device, Dock eSATA Device, LOM MAC Address, Video

Controller, Video BIOS Version, Video Memory, Panel Type, Native

Resolution, Audio Controller, Modem Controller, Wi-Fi Device,

Cellular Device, Bluetooth Device.

Battery Information

Displays the battery status and the type of AC adapter connected to the
computer

Boot Sequence

Allows you to change the order in which the computer attempts to find
an operating system.

• Diskette Drive
• Internal HDD
• USB Storage Device
• CD/DVD/CD-RW Drive
• Onboard NIC

Boot List Option

Allows you to change the boot list option.

• Legacy
• UEFI

Date/Time

Allows you to change the date and time.

Table 16. System Configuration

Option

Description

Integrated NIC

Allows you to configure the integrated network controller. The options
are:

• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by default.

System Management

Allows you to control the system management mechanism. The options
are:

• Disabled : This option is enabled by default
• ASF 2.0
• Alert only

NOTE: This item is for non-Vpro system only.

Parallel Port

Allows you to configure the parallel port on the docking station. The
options are:

• Disabled
• AT: This option is enabled by default.
• PS2
• ECP

Summary of Contents for Latitude E5530


















































































Search results

Summary of Contents for Latitude E5530

Reviews:

Related manuals for Latitude E5530

Brands by name

Popular brands

Dell Latitude E5530, Owner'S Manual

Search results

Summary of Contents for Latitude E5530

Reviews:

Related manuals for Latitude E5530

Brands by name

Popular brands