manualshive.com logo in svg

Dell Latitude E5530, Owner'S Manual

Share
Download
Dell Latitude E5530 Owner'S Manual Download Page 42

Removing the Modem Card

1.

Follow the procedures in 

Before Working Inside Your Computer

.

2.

Remove:
a) SD memory card
b) battery
c) access panel
d) keyboard trim
e) keyboard
f) optical drive
g) hard drive
h) right base panel
i) palmrest
j) display assembly
k) right support frame

3.

Remove the screw that secures the modem card to the computer.

4.

Lift the modem card to disengage from the connector on the back of the card.

5.

Disconnect the network connector cable from the modem card.

6.

Lift the modem card from the computer.

Installing the Modem Card

1.

Place the modem card on the Input/Output (I/O) board in the computer.

2.

Connect the network connector cable to the modem card.

3.

Engage the modem card to the connector located at the back of the computer.

4.

Tighten the screw to secure the modem card to the computer.

5.

Install:
a) right support frame
b) display assembly
c) palmrest
d) right base panel
e) hard drive
f) optical drive
g) keyboard
h) keyboard trim
i) access panel
j) battery
k) SD memory card

42

Summary of Contents for Latitude E5530


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands