Back to Contents Page
PC Card Reader
Dell™ Latitude™ D631 Service Manual
1.
Follow the instructions in
Before You Begin
.
2.
Remove any installed media bay device (see
Media Bay Devices
).
3.
Remove the hinge cover (see
Hinge Cover
).
4.
Remove the keyboard (see
Removing the Keyboard
).
5.
Remove the palm rest (see
Palm Rest
).
6.
Remove the four M2 x 3-mm screws that secure the PC Card reader to the computer.
7.
Use the pull tab to disconnect the PC Card reader connector from the system board.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.
1
PC Card reader
2
M2 x 3-mm screws (4)
3
pull tab
NOTICE:
To avoid damaging the PC Card reader connector, do not rotate or rock the connector as you remove it. Use firm and even pressure to lift the
pull tab vertically.
Summary of Contents for Latitude D631
Page 16: ......
Page 29: ...Back to Contents Page ...
