9.
Turn the computer upside down with the back of the computer facing you.
10.
From the back of the computer, remove the two M2.5 x 8-mm screws.
11.
From the bottom of the computer, remove the two M2.5 x 8-mm screws labeled "D."
12.
Turn the computer right-side up and open the display.
13.
Lift the display assembly out of the computer base.
Removing the Display Bezel
1.
Follow the instructions in
Before You Begin
.
2.
Remove the display assembly (see
Display Assembly
).
3.
Use a plastic scribe to pry the six rubber screw covers/display bumpers out of the screw holes on the front of the bezel.
1
antenna cables (2)
2
display cable pull tab
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.
Summary of Contents for Latitude D631
Page 16: ......
Page 29: ...Back to Contents Page ...
