background image

over. 

CD-RW

 

 CD rewritable 

 A rewritable version of a CD. Data can be written to a CD-RW disc, and then erased and written over (rewritten). 

CD-RW drive

 

 A drive that can read CDs and write to CD-RW (rewritable CDs) and CD-R (recordable CDs) discs. You can write to CD-RW discs multiple times, 

but you can write to CD-R discs only once. 

CD-RW/DVD drive 

 A drive, sometimes referred to as a combo drive, that can read CDs and DVDs and write to CD-RW (rewritable CDs) and CD-R 

(recordable CDs) discs. You can write to CD-RW discs multiple times, but you can write to CD-R discs only once. 

clock speed

 

 The speed, given in MHz, that indicates how fast computer components that are connected to the system bus operate.  

COA

 

 Certificate of Authenticity 

 The Windows alpha-numeric code located on a sticker on your computer. Also referred to as the 

Product Key

 or 

Product ID

Control Panel

 

 A Windows utility that allows you to modify operating system and hardware settings, such as display settings. 

controller

 

 A chip that controls the transfer of data between the processor and memory or between the processor and devices. 

CRIMM

 

 continuity rambus in-line memory module 

 A special module that has no memory chips and is used to fill unused RIMM slots. 

cursor

 

 The marker on a display or screen that shows where the next keyboard, touch pad, or mouse action will occur. It often is a blinking solid line, an 

underline character, or a small arrow. 

 

DDR SDRAM 

 double-data-rate SDRAM 

 A type of SDRAM that doubles the data burst cycle, improving system performance. 

DDR2 SDRAM 

 double-data-rate 2 SDRAM 

 A type of DDR SDRAM that uses a 4-bit prefetch and other architectural changes to boost memory speed to over 

400 MHz.

 

device

 

 Hardware such as a disk drive, printer, or keyboard that is installed in or connected to your computer. 

device driver

 

 See 

driver

DIMM

 

 dual in-line memory module 

 A circuit board with memory chips that connects to a memory module on the system board. 

DIN connector

 

 A round, six-pin connector that conforms to DIN (Deutsche Industrie-Norm) standards; it is typically used to connect PS/2 keyboard or mouse 

cable connectors. 

disk striping

 

 A technique for spreading data over multiple disk drives. Disk striping can speed up operations that retrieve data from disk storage. 

Computers that use disk striping generally allow the user to select the data unit size or stripe width.  

DMA

 

 direct memory access 

 A channel that allows certain types of data transfer between RAM and a device to bypass the processor. 

DMTF

 

 Distributed Management Task Force 

 A consortium of hardware and software companies who develop management standards for distributed 

desktop, network, enterprise, and Internet environments. 

domain

 

 A group of computers, programs, and devices on a network that are administered as a unit with common rules and procedures for use by a specific 

group of users. A user logs on to the domain to gain access to the resources. 

DRAM

 

 dynamic random-access memory 

 Memory that stores information in integrated circuits containing capacitors. 

driver

 

 Software that allows the operating system to control a device such as a printer. Many devices do not work properly if the correct driver is not 

installed in the computer. 

DSL 

 Digital Subscriber Line 

 A technology that provides a constant, high-speed Internet connection through an analog telephone line.  

dual-core

 

 A technology in which two physical computational units exist inside a single processor package, thereby increasing computing efficiency and multi-

tasking ability. 

dual display mode

 

 A display setting that allows you to use a second monitor as an extension of your display. Also referred to as 

extended display mode

DVD-R

 

 DVD recordable 

 A recordable version of a DVD. Data can be recorded only once onto a DVD-R. Once recorded, the data cannot be erased or 

written over. 

DVD+RW

 

 DVD rewritable 

 A rewritable version of a DVD. Data can be written to a DVD+RW disc, and then erased and written over (rewritten). (DVD+RW 

technology is different from DVD-RW technology.) 

DVD+RW drive

 

 drive that can read DVDs and most CD media and write to DVD+RW (rewritable DVDs) discs. 

DVI

 

 digital video interface 

 A standard for digital transmission between a computer and a digital video display. 

 

ECC

 

 error checking and correction 

 A type of memory that includes special circuitry for testing the accuracy of data as it passes in and out of memory. 

ECP

 

 extended capabilities port 

 A parallel connector design that provides improved bidirectional data transmission. Similar to EPP, ECP uses direct memory 

access to transfer data and often improves performance. 

EIDE 

 enhanced integrated device electronics 

 An improved version of the IDE interface for hard drives and CD drives. 

Summary of Contents for Latitude D530

















































Reviews: