Dell Latitude D530 Service Manual Download Page 1

Page: 1 / 48

Dell™ Latitude™ D530 Service Manual

Model PP17L

November 2007 Rev. A00

Model PP17L

Notes, Notices, and Cautions

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo,

Latitude, and Dell OpenManage

are trademarks of Dell Inc.;

Intel

Pentium, and Celeron

are registered trademarks of Intel

Corporation;

Microsoft

Windows, Windows Server, Windows XP, MS-DOS and Windows Vista

are either trademarks or registered trademarks of Microsoft Corporation in the United

States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Before You Begin

Palm Rest

Internal Card With Bluetooth

Wireless Technology

System Fan

Hard Drive

Processor Thermal-Cooling Assembly

Memory Module

Processor Module

Modem

Speaker Assembly

Coin-Cell Battery

Base Latch

Hinge Cover

System Board Assembly

Keyboard

Flashing the BIOS

Mini-Card

Pin Assignments for I/O Connectors

Display Assembly

Glossary

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for Latitude D530

















































Search results

Summary of Contents for Latitude D530

Reviews:

Related manuals for Latitude D530

Brands by name

Popular brands

Dell Latitude D530, Service Manual

Search results

Summary of Contents for Latitude D530

Reviews:

Related manuals for Latitude D530

Brands by name

Popular brands