Installing the speaker module
1
Place the speaker module into the slots on the computer.
2
Route the speaker cable through the routing channel and secure it with the tapes.
3
Connect the speaker cable to the connector on the system board.
4
Connect the smart cable to the connector on the palm rest.
5
Install the:
a
b
c
d
e
NOTE:
To install both cards if equipped.
6
Follow the procedure in
After working inside your computer
.
Smart Card Cage
Removing the smart card cage
NOTE:
Always remove the smart card from the smart card reader.
1
Follow the procedure in
Before working inside your computer
.
2
Remove:
a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler
c
d
e
3
To disconnect the cables:
a Disconnect the smart card cable [1].
b Disconnect the LED board cable [2].
c Peel the SSD thermal pad from the SSD slot [3].
NOTE:
You may need to apply force to peel off the SSD thermal
pad.
18
Removing and installing components
