a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler
c
d
3
To remove the WWAN card:
a Remove 1 (M2.0 x 3.0) screw that secures the WWAN card bracket in place [1].
b Lift the WWAN card bracket that secures the WWAN card [2].
c Disconnect the WWAN cables from the connectors on the WWAN card [3].
d Lift the WWAN card from the computer [4].
Installing the WWAN card
1
Insert the WWAN card into the connector on the system board.
2
Connect the WWAN cables to the connectors on the WWAN card.
3
Place the metal bracket and replace the M2.0 x 3.0 screw to secure the WLAN card to the computer.
4
Install the:
a
b
c
d
NOTE:
To install both cards if equipped.
5
Follow the procedure in
After working inside your computer
.
NOTE:
The IMEI number can also be found on the WWAN card.
14
Removing and installing components
