Dell Latitude 7220EX, Service Manual

Page: 77 / 94

Option Description
Enable Advanced Battery Charge Mode- is disabled
Battery#1 Charge
Configuration Allows you to select the charging mode for the battery. The options are:
● Adaptive—enabled by default
● Standard—Fully charges your battery at a standard rate.
● ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology.
● Primarily AC use
● Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
Battery#2
Charge
Configuration Allows you to select the charging mode for the battery. The options are:
● Adaptive—enabled by default
● Standard—Fully charges your battery at a standard rate.
● ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology.
● Primarily AC use
● Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
Dock Battery
Charger Mode Allows you to select the charging mode for the battery. The options are:
● Standard—enabled by default
● ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology.
Type-C
Connector Power This allows you to set the maximum power that can be drawn from the Type-C connector. The options
are:
● 7.5 Watts—enabled by default
● 15 Watts
NOTE: Setting a higher power value for the Type-C connector may cause the system to throttle
sooner, if the total system power budget is exceeded.
Power Usage
Mode Allows you to choose the system power usage mode. The options are:
● Power Saver
● Balanced-enabled by default
● Performance
● High Performance
POST behavior
Option Description
Adapter
Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
Default setting: Enable Adapter Warnings
USB-C Warnings Allows you to enable the system displays warning messages for USB-C devices.
Enable Dock Warning Messages. This option is enabled by default.
Keypad
(Embedded) Allows you to select one of the two methods to enable the keypad that is embedded in the internal
keyboard.
● Fn Key Only—enabled by default
● By Numlock
System setup 77