3. Slide the battery latch to the locked state.
4. Ensure that the battery release latch is in the locked state.
Next steps
1. Install the
.
after working inside the tablet
Subscriber Identification Module (SIM) card
Removing the uSIM
Prerequisites
before working inside the tablet
2. Remove the
.
3. Remove the
About this task
The figure indicates the location of the uSIM and provides a visual representation of the removal procedure.
Steps
1. Open the uSIM slot cap.
2. Press the uSIM card, and slide it out of the slot.
NOTE:
Use a flat pointed scribe to ease removing the SIM.
Inserting the uSIM
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
Field service information
27
Summary of Contents for Latitude 7220EX
