Removing the camera
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
•
Prerequisites
NOTE:
These instructions are applicable only for laptops with a non-touchscreen display.
1. Remove the
.
2. Follow the procedure from step 1 to step 3 in “
”.
3. Remove the
.
4. Follow the procedure from step 1 to step 5 in “
”.
5. Follow the procedure from step 1 to step 3 in “
”.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
10. Remove the
11. Remove the
.
12. Remove the
Procedure
1. Using a plastic scribe, gently pry the camera off the display back-cover.
2. Disconnect the camera cable from the camera.
39
Removing the camera
69
Summary of Contents for Latitude 3000 Series
