Dell Latitude 3000 Series Service Manual Download | Manualshive

Page: 32 / 79

background image

Replacing the wireless card

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

•

•

Post-requisites

Procedure

CAUTION:

To avoid damage to the wireless card, do not place any cables under it.

1. Align the notch on the wireless card with the tab on the wireless-card slot and slide the card into the slot.
2. Press the other end of the wireless card and replace the screw that secures the wireless card to the system board.
3. Connect the antenna cables to the wireless card.

The following table provides the antenna-cable color scheme for the wireless card supported by your computer:

Connectors on the wireless card

Antenna-cable color

Main (white triangle)

White

Auxiliary (black triangle)

Black

16

32

Replacing the wireless card

«
...
30
31
32
33
34
...
»

Summary of Contents for Latitude 3000 Series
















































































Reviews:

No comments

Related manuals for Latitude 3000 Series

Brand: cam Pages: 2

imagePROGRAF iPF830

Brand: Canon Pages: 16

Brand: Canon Pages: 6

Brand: BAC Pages: 36

Brand: Baader Planetarium Pages: 6

Brand: Dacor Pages: 4

Brand: paramondo Pages: 44

Brand: Salta Pages: 76

Brand: Saft Pages: 52

Brand: Majestic Pages: 4

Brand: Antec Pages: 5

Brand: probrake Pages: 2

Brand: Produal Pages: 9

Brand: Ericsson Pages: 487

Ocean Seven 304Plus

Brand: idronaut Pages: 79

Brand: APOLON Pages: 19

E-Bike Frontlight E 80

Brand: RFR Pages: 2

Brand: StarTech.com Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands