Dell Latitude 3000 Series, Service Manual

Page: 63 / 79

Removing the display bezel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
NOTE: These instructions are applicable only for laptops with a non-touch screen display.
1. Remove the battery .
2. Follow the procedure from step 1 to step 3 in “ Removing the optical drive ”.
3. Remove the keyboard .
4. Follow the procedure from step 1 to step 5 in “ Removing the base cover ”.
5. Follow the procedure from step 1 to step 3 in “ Removing the hard drive ”.
6. Remove the memory module .
7. Remove the wireless card .
8. Remove the I/O board .
9. Remove the heat sink .
10. Remove the system board .
11. Remove the display assembly .
Procedure
1. Using your fingertips, gently pry up the inner edges of the display bezel.
2. Lift the display bezel off the display assembly.
35
Removing the display bezel 63