Dell IP4700 Installation And Service Manual Download Page 11

Page: 11 / 126

IP4700 Installation and Service Guide

Preface

EMC uses the following type style conventions in this guide:

Where to Get Help

Obtain technical support by calling your local sales office.

For service, call:

and ask for Customer Service.

Your Comments

Your suggestions will help us continue to improve the accuracy,
organization, and overall quality of the user publications. Please
e-mail us at [email protected] to let us know your
opinion or any errors concerning this manual.

Boldface

•

Specific filenames or complete paths.

•

Window names and menu items in text.

•

Selections you can make from the user
interface, including buttons, icons, options,
and field names.

•

Emphasis in cautions and warnings.

Italic

•

New terms or unique word usage in text.

•

Command line arguments when used in text.

Fixed space

Examples of specific command entries that you
would type, displayed text, or program listings.
For example:

QUERY [CUU=cuu|VOLSER=volser]

Fixed italic

Arguments used in examples of command line
syntax.

United States: (800) 782-4362 (SVC-4EMC)

Canada:

(800) 543-4782 (543-4SVC)

Worldwide:

(508) 497-7901

Summary of Contents for IP4700































































































































Search results

Summary of Contents for IP4700

Reviews:

Related manuals for IP4700

Brands by name

Popular brands

Dell IP4700, Installation And Service Manual

Search results

Summary of Contents for IP4700

Reviews:

Related manuals for IP4700

Brands by name

Popular brands