Dell Inspiron 8200 Technical Specifications Download

Page: 42 / 57

Press <Enter> again to restart your computer.

10.

Click

Next

when the

Welcome to the Windows 2000 Setup Wizard

screen appears.

11.

When the

Regional Settings

screen appears, select the settings for your locale, and then click

Next

12.

Enter your name and organization in the

Personalize Your Software

screen, and then click

Next

13.

Type the Windows product key in the fields provided, and then click

Next

The product key is the bar code number found on the Microsoft Windows label, which is located behind the front-panel connector door as shown on the

START HERE

sheet for your computer.

14.

When the

Computer Name and Administrator Password

screen appears, enter a name for your computer and a password, if desired. Then click

Next

15.

Enter the date and time in the

Date and Time Settings

screen, and then click

Next

Windows 2000 now begins to install its components and configure the computer.

16.

When the

Completing the Windows 2000 Setup Wizard

screen appears, remove the CD from the drive, and then click

Finish

The computer automatically restarts.

Back to Contents Page

Summary of Contents for Inspiron 8200


























































Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands

Dell Inspiron 8200, Technical Specifications

Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands