Dell Inspiron 8000 Service Manual Download Page 99

Page: 99 / 105

Removing and Replacing Parts : Dell Inspiron 8100

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any

installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically

touching an unpainted metal surface on the computer.

Removing the Battery Charger Board

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove the

3. Remove the

4. Remove the

5. Remove the

6. Lift out the video card.

7. Lift the battery charger board out of the system board connector.

Replacing the Battery Charger Board

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8000/8000_SERVICE_MAN/remove.htm (46 of 52)6/21/2004 1:07:33 AM

Summary of Contents for Inspiron 8000










































































































Search results

Summary of Contents for Inspiron 8000

Reviews:

Related manuals for Inspiron 8000

Brands by name

Popular brands

Dell Inspiron 8000, Service Manual

Search results

Summary of Contents for Inspiron 8000

Reviews:

Related manuals for Inspiron 8000

Brands by name

Popular brands