1. Place the display assembly on a dry, flat, and clean surface.
2. Slide the palm-rest and keyboard assembly at an angle, and place the palm-rest and keyboard assembly on the display
assembly.
3. Replace the three screws (M2.5x4.5) that secure the left-display hinge to the palm-rest and keyboard assembly.
4. Replace the three screws (M2.5x4.5) that secure the right-display hinge to the palm-rest and keyboard assembly.
5. Connect the display-cable connector to the system board.
6. Adhere the tape that secures the display cable to the system board.
1. Install the
.
After working inside your computer
.
Power-adapter port
Removing the power-adapter port
Before working inside your computer
.
2. Remove the
.
The following image indicates the location of the power-adapter port and provides a visual representation of the removal
procedure.
Removing and installing components
41
