Dell Inspiron 7500 2n1 Silver Service Manual Download Page 40 | Manualshive

Page: 40 / 73

background image

About this task

The following image indicates the location of the I/O board and provides a visual representation of the installation procedure.

Steps

1. Slide the I/O board into the slots on the palm-rest and keyboard assembly.
2. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
4. Slide the fingerprint reader-cable into the connector on the I/O board and close the latch to secure the cable.
5. Connect the I/O-board cable to the I/O board.
6. Connect the coin-cell battery cable to the I/O board.
7. Adhere the tape that secures the fingerprint reader-cable to the I/O board.
8. Close the left display hinge.
9. Replace the two screws (M2x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly.
10. Replace the screw (M2.5x5) that secures the left display hinge to the palm-rest and keyboard assembly.

Next steps

.

3. Follow the procedure in

After working inside your computer

.

40

Removing and installing components

«
...
38
39
40
41
42
...
»

Summary of Contents for Inspiron 7500 2n1 Silver










































































Reviews:

No comments

Related manuals for Inspiron 7500 2n1 Silver

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 56

Toughbook CF-18 Series

Brand: Panasonic Pages: 48

Brand: IBM Pages: 503

Brand: XPG Pages: 30

Brand: UMAX Technologies Pages: 50

Brand: TONGFANG Pages: 44

Brand: Orbic Pages: 33

Brand: Lenovo Pages: 4

Brand: Lenovo Pages: 126

Brand: Lenovo Pages: 148

Brand: Lenovo Pages: 158

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands