manualshive.com logo in svg

Dell Inspiron 7500 2n1 Silver, Service Manual, Page: 63 / 73

Share
Download
Dell Inspiron 7500 2n1 Silver Service Manual Download Page 63

System Configuration

By default, Touchscreen is selected.

Enable Fingerprint Reader Device

Enables or disables the Fingerprint Reader Device.

By default, Enable Fingerprint Reader Device is selected.

Enable MediaCard

Enables to switch all media cards On/Off or set the media card to read-only state.

By default, Enable Secure Digital (SD) Card is selected.

Keyboard Illumination

Configures the operating mode of the keyboard illumination feature.

Default: Bright. Enable the keyboard illumination feature at 100% brightness level.

Keyboard Backlight Timeout on AC

Configures the timeout value for the keyboard when an AC adapter is connected to
the computer. The keyboard backlight timeout value is only effect when the backlight
is enabled.

Default: 10 seconds

Keyboard Backlight Timeout on Battery

Configures the timeout value for the keyboard when the computer is running on
battery. The keyboard backlight timeout value is only effect when the backlight is
enabled.

Default: 10 seconds

Table 6. System setup options—Video menu

Video

LCD Brightness

Brightness on battery power

Sets the screen brightness when the computer is running on battery power.

Default: 50

Brightness on AC power

Sets the screen brightness when the computer is running on AC power.

Default: 100

Table 7. System setup options—Security menu

Security

Enable Admin Setup Lockout

Enables or disables the user from entering BIOS Setup when an Admin Password is
set.

Default: OFF

Password Bypass

Bypass the System (Boot) Password and the internal hard drive password prompts
during a system restart.

Default: Disabled

Enable Non-Admin Password Changes

Enables or disables the user to change the system and hard drive password without
the need for admin password.

Default: ON

Non-Admin Setup Changes

Enable UEFI Capsule Firmware Updates

Enables or disables BIOS updates through UEFI capsule update packages.

Default: ON

Absolute

Enables, disables or permanently disable the BIOS module interface of the optional
Absolute Persistence Module service from Absolute Software.

Default: Enabled

TPM 2.0 Security On

Select whether or not the Trusted Platform Model (TPM) is visible to the OS.

Default: ON

System setup

63

Summary of Contents for Inspiron 7500 2n1 Silver










































































Reviews:

No comments