Dell Inspiron 7500 2n1 Silver, Service Manual

Page: 62 / 73

Boot Configuration
UEFI Boot Path Security Enables or disables the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu.
Default: Always Except Internal HDD
Table 5. System setup options—System Configuration menu
System Configuration
Date/Time
Date Sets the computer date in MM/DD/YYYY format. Changes to the date take effect
immediately.
Time Sets the computer time in HH/MM/SS 24-hour format. You can switch between 12-
hour and 24-hour clock. Changes to the time take effect immediately.
Storage Interface
Port Enablement Enables the selected onboard drives.
Default: ON
SATA Operation Configures operating mode of the integrated SATA hard drive controller.
Default: RAID On. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Drive Information Displays the information of various onboard drives.
Enable SMART Reporting Enables or disables Self-Monitoring, Analysis, and Reporting Technology (SMART).
Default: OFF
Enable Audio Enables or disables all integrated audio controller.
Default: ON
Enable Microphone Enables or disables microphone.
By default, Enable Microphone is selected.
Enable Internal Speaker Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
USB Configuration Enables or disables booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
By default, Enable USB Boot Support is selected.
By default, Enable External USB Ports is selected.
Thunderbolt Adapter Configuration
Enable Thunderbolt Technology Support Enables or disables Thunderbolt Technology Support.
Default: ON
Enable Thunderbolt Boot Support Enables or disables Thunderbolt Boot Support.
Default: OFF
EnableThunderbolt (and PCIe behind TBT)
pre-boot modules Enables or disables to allow or disallow PCIe devices to be connected through a
Thunderbolt adapter during pre-boot.
Default: OFF
Miscellaneous Devices Enables or disables various onboard devices.
Enable Camera Enables or disables the camera.
By default, Enable Camera is selected.
Touchscreen Enables or disables the touchscreen.
62 System setup