Dell Inspiron 660 Owner'S Manual Download Page 97

Page: 97 / 110

System Setup

USB Boot Support

Allows you to enable or disable booting from USB
mass storage devices such as hard drive, optical
drive, USB key, and so on.

Enabled or Disabled (Disabled by default)

Boot Mode

Specifies the boot sequence from the
available devices

1st Boot

Displays the first boot device

2nd Boot

Displays the second boot device

3rd Boot

Displays the third boot device

4th Boot

Displays the fourth boot device

5th Boot

Displays the fifth boot device

Power

Wake Up by Integrated

LAN/WLAN

Allow the computer to be powered on by
special LAN or wireless LAN signals

Enabled or Disabled (Disabled by default)

AC Recovery

Allows you to configure the behavior of your
computer after it recovers from a power failure

Power Off, Power On, or Last Power State
(Power Off by default)

Auto Power On

Allows you to enable or disable the computer from
turning on automatically

Enabled or Disabled (Disabled by default)

Auto Power On Mode

Allows you to set the computer to turn on
automatically every day or on a preselected date;
This option can be configured only if the Auto
Power On mode is set to Enabled

Everyday or Selected Day (Selected Day by default)

Boot

(continued)

book.book Page 97 Tuesday, April 17, 2012 11:37 AM

Summary of Contents for Inspiron 660















































































































Search results

Summary of Contents for Inspiron 660

Reviews:

Related manuals for Inspiron 660

Brands by name

Popular brands

Dell Inspiron 660, Owner'S Manual

Search results

Summary of Contents for Inspiron 660

Reviews:

Related manuals for Inspiron 660

Brands by name

Popular brands