Dell Inspiron 660 Owner'S Manual Download Page 95

Page: 95 / 110

System Setup

Advanced — CPU Feature

Intel Hyper-Threading

Technology

Allows you to enable or disable the Intel
Hyper-Threading feature for the processor

Enabled or Disabled (Enabled by default)

Intel(R) SpeedStep Technology

Allows you to enable or disable the Intel
SpeedStep feature for the processor

Enabled or Disabled (Enabled by default)

Intel(R) Virtualization

Technology

Allows you to enable or disable the
Intel virtualization feature for the
processor

Enabled or Disabled (Enabled by default)

CPU XD Support

Allows you to enable or disable the
execute disable mode for the processor

Enabled or Disabled (Enabled by default)

Limit CPUID Value

Allows you to limit the maximum value
the processor standard CPUID function
will support

Enabled or Disabled (Disabled by
default)

Multi Core Support

Allows you to specify if processor will have
either one or all cores enabled

Enabled or Disabled (Enabled by default)

Enabled - all cores; Disabled - one core
only

Intel(R) Turbo Boot

Technology

Allows you to enable or disable the Intel
turbo boot technology mode for the
processor

Enabled or Disabled (Enabled by default)

book.book Page 95 Tuesday, April 17, 2012 11:37 AM

Summary of Contents for Inspiron 660















































































































Search results

Summary of Contents for Inspiron 660

Reviews:

Related manuals for Inspiron 660

Brands by name

Popular brands

Dell Inspiron 660, Owner'S Manual

Search results

Summary of Contents for Inspiron 660

Reviews:

Related manuals for Inspiron 660

Brands by name

Popular brands