Dell Inspiron 660 Owner'S Manual Download Page 70

Page: 70 / 110

Processor Fan and Heat-Sink Assembly

Procedure

WARNING:

Despite having a plastic shield, the processor fan and heat-sink

assembly may be very hot during normal operation. Ensure that it has had
sufficient time to cool before you touch it.

CAUTION:

The processor fan and heat-sink assembly is a single unit. Do not try to

remove the fan separately.

CAUTION:

To ensure maximum cooling for the processor, do not touch the heat

transfer areas on the processor fan and heat-sink assembly. The oils in your skin
can reduce the heat transfer capability of the thermal grease.

Disconnect the processor fan cable from the system board connector
(

FANCPU)

. See "System Board Components" on page 14.

Using a flat-blade screwdriver loosen the captive screws that secure the
processor fan and heat-sink assembly to the system board.

Lift the processor fan and heat-sink assembly out of the computer.

processor fan cable

processor fan and heat-sink assembly

captive screws (4)

book.book Page 70 Tuesday, April 17, 2012 11:37 AM

Summary of Contents for Inspiron 660















































































































Search results

Summary of Contents for Inspiron 660

Reviews:

Related manuals for Inspiron 660

Brands by name

Popular brands

Dell Inspiron 660, Owner'S Manual

Search results

Summary of Contents for Inspiron 660

Reviews:

Related manuals for Inspiron 660

Brands by name

Popular brands