Dell Inspiron 660 Owner'S Manual Download Page 41

Page: 41 / 110

Mini-Card

Replacing the Mini-Card

CAUTION:

The connectors are keyed to ensure correct insertion. Use of

excessive force may damage the connectors.

CAUTION:

To avoid damage to the Mini-Card, ensure that there are no cables

under the Mini-Card.

Procedure

Align the notch on the Mini-Card with the tab on the
system-board connector.

Insert the Mini-Card at a 45-degree angle into the system-board connector.

Press the other end of the Mini-Card down into the slot on the
system board and replace the screw that secures the Mini-Card to the
system board.

Connect the appropriate antenna cables to the Mini-Card you are
installing. The Mini-Card has two triangles marked on the label
(black and white):

•

Connect the black cable to the connector marked with a
black triangle.

•

Connect the white cable to the connector marked with a
white triangle.

Postrequisites

Replace the computer cover. See "Replacing the Computer Cover" on
page 19.

Follow the instructions in "After Working Inside Your Computer" on
page 11.

book.book Page 41 Tuesday, April 17, 2012 11:37 AM

Summary of Contents for Inspiron 660















































































































Search results

Summary of Contents for Inspiron 660

Reviews:

Related manuals for Inspiron 660

Brands by name

Popular brands

Dell Inspiron 660, Owner'S Manual

Search results

Summary of Contents for Inspiron 660

Reviews:

Related manuals for Inspiron 660

Brands by name

Popular brands