Dell Inspiron 22 3000 SERIES Service Manual Download

Page: 113 / 130

Hard Drive

The following table shows the hard drive options available in Inspiron 22–3265.

Options

Dimensions

HDD

2.5 inch drive

Identifying the hard drive

On the taskbar, click or tap the search box, and then type

Device Manager

2 Click or tap

Device Manager

The

Device Manager

window is displayed.

3 Expand

Disk drives

Identifying the hard drive in BIOS setup program

Turn on or restart the computer.

2 Press F2 when the Dell logo is displayed on the screen to enter the BIOS setup

program.
A list of hard drives is displayed under the

System Information

in the

General

group.

Media-card reader

The Inspiron 22–3265 has one SD card slot located on the left side of your
computer.

Downloading the media-card reader driver

Turn on your computer.

2 Go to

www.dell.com/support

Technology and components

113

Summary of Contents for Inspiron 22 3000 SERIES



































































































































Search results

Summary of Contents for Inspiron 22 3000 SERIES

Reviews:

Related manuals for Inspiron 22 3000 SERIES

Brands by name

Popular brands

Dell Inspiron 22 3000 SERIES, Service Manual

Search results

Summary of Contents for Inspiron 22 3000 SERIES

Reviews:

Related manuals for Inspiron 22 3000 SERIES

Brands by name

Popular brands