Dell Inspiron 14z N411z Owner'S Manual Download Page 74

Page: 74 / 102

System Board

Disconnect the DC-in connector cable and the speaker cable from the

connectors on the system board.

Lift the securing latches and disconnect the USB-board cable from the

connectors on the system board and the USB board.

Lift the securing latch and disconnect the media-card reader board cable

from the connector on the system board.

Remove the four screws that secure the system-board assembly to the

computer base.

Carefully ease the ports on the system-board assembly out of the slots in

the computer base and lift the system-board assembly out of the computer

base.

DC-in cable connector

USB-board cable connectors (2)

speaker-cable connector

media-card reader cable connectors

(2)

Summary of Contents for Inspiron 14z N411z







































































































Search results

Summary of Contents for Inspiron 14z N411z

Reviews:

Related manuals for Inspiron 14z N411z

Brands by name

Popular brands

Dell Inspiron 14z N411z, Owner'S Manual

Search results

Summary of Contents for Inspiron 14z N411z

Reviews:

Related manuals for Inspiron 14z N411z

Brands by name

Popular brands