Dell Inspiron 14z N411z Owner'S Manual Download Page 25

Page: 25 / 102

Optical Drive

Replacing the Optical Drive

Follow the instructions in "Before You Begin" on page 9.

Align the tabs on the optical-drive bezel with the slots on the optical drive

and snap the optical-drive bezel into place.

Align the screw holes on the optical-drive bracket with the screw holes on

the optical drive.

Replace the two screws that secure the optical-drive bracket to the optical

drive.

Slide the optical-drive assembly into the optical-drive bay.

Replace the screw that secures the optical-drive assembly to the computer

base.

Replace the module cover. See "Replacing the Module Cover" on page 16.

optical-drive bezel

optical drive

optical-drive bracket

screws (2)

Summary of Contents for Inspiron 14z N411z







































































































Search results

Summary of Contents for Inspiron 14z N411z

Reviews:

Related manuals for Inspiron 14z N411z

Brands by name

Popular brands

Dell Inspiron 14z N411z, Owner'S Manual

Search results

Summary of Contents for Inspiron 14z N411z

Reviews:

Related manuals for Inspiron 14z N411z

Brands by name

Popular brands