Replacing the heat-sink
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
CAUTION: Incorrect alignment of the heat sink can cause damage to
the system board and processor.
NOTE: The original thermal grease can be reused if the original system
board and fan are reinstalled together. If either the system board or the
fan is replaced, use the thermal pad provided in the kit to ensure that
thermal conductivity is achieved.
Procedure
1
Align the screw holes on the heat-sink assembly with the screw holes on
the system board.
2
In sequential order, as indicated on the heat-sink assembly, tighten the
captive screws that secure the heat-sink assembly to the system board.
3
Replace the screws that secure the heat-sink assembly to the system
board.
4
Connect the fan cable to the system board.
Post-requisites
1
Replace the
computer base
.
2
Replace the
keyboard
.
3
Replace the
wireless card
.
4
Follow the procedure from step 5 to step 7 in “
Replacing the hard drive
”.
5
Replace the
memory modules
.
6
Replace the
optical drive
.
7
Replace the
base cover
.
8
Replace the
battery
.
52
Summary of Contents for Inspiron 14 5458
