Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the optical-drive bracket with the screw holes
on the optical drive.
2
Replace the screws that secure the optical-drive bracket to the optical
drive.
3
Align the tabs on the optical-drive bezel with the slots on the optical-
drive assembly and snap the optical-drive bezel into place.
4
Slide the optical-drive assembly into the optical-drive bay and align the
screw hole on the optical-drive bracket with the screw hole on the
computer base.
5
Replace the screw that secures the optical-drive assembly to the
computer base.
Post-requisites
Replace the
battery
.
19
Summary of Contents for Inspiron 14 5458
