Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the I/O-board cable into the connector on the I/O-board and press
down on the latch to secure the cable.
2
Turn the I/O board over and align the screw hole on the I/O board with
the screw hole on the palm-rest assembly.
3
Replace the screw that secures the I/O board to the palm-rest assembly.
Post-requisites
1
Replace the
computer base
.
2
Replace the
keyboard
.
3
Replace the
wireless card
.
4
Follow the procedure from step 5 to step 7 in “
Replacing the hard drive
”.
5
Replace the
optical drive
.
6
Replace the
base cover
.
7
Replace the
battery
.
55
Summary of Contents for Inspiron 14 5458
