6. Install the
.
7. Install the
.
8. Install the
.
After working inside your computer
.
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
solid-state drive from M.2 slot one
.
6. Remove the
solid-state drive from M.2 slot two
.
7. Remove the
.
8. Remove the battery (
or
).
9. Remove the
.
10. Remove the
.
11. Remove the
.
12. Remove the
.
13. Remove the
.
14. Remove the
.
15. Remove the
power-button board with optional fingerprint reader
.
16. Remove the
NOTE:
The system board can be removed along with the heat sink.
17. Remove the
.
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
64
Removing and installing components
