Steps
1. Place the power-adapter port into the slot on the palm rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power-adapter port on the palm-rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guides on the palm-rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
5. Press down the right display-hinge and align the screw holes on the display hinges with the screw holes on the system
board.
6. Replace the two screws (M2.5x5) that secure the right display-hinge to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
42
Removing and installing components
