Replacing the Speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Using the alignment posts on the palmrest and keyboard assembly, place
the speakers on the palmrest and keyboard assembly.
2
Route the speaker cable through the routing guides on the palmrest and
keyboard assembly.
3
Adhere the adhesive tapes that secure the speaker cable on the palmrest
and keyboard assembly.
4
Connect the speaker cable to the system board.
5
Slide the touchpad cable into the connector on the touchpad and press
down the connector latch to secure the cable.
Post-requisites
1
Replace the
power and volume-buttons board
.
2
Replace the
battery
.
3
Replace the
base cover
.
34