Replacing the Power and
Volume-Buttons Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Place the power and volume-buttons board into the slot on the palmrest
and keyboard assembly.
2
Route the power and volume-buttons board cable through the routing
guides on the speaker.
3
Connect the power and volume-buttons board cable to the system
board.
Post-requisites
1
Replace the
battery
.
2
Replace the
base cover
.
31