9. Remove the
.
10. Remove the
.
11. Remove the
12. Remove the
NOTE:
The system board can be removed as an assembly with the memory modules, fan and heat-sink assembly,
ethernet and audio board, and USB board attached.
13. Remove the
.
14. Remove the
.
15. Remove the
.
16. Remove the
.
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
NOTE:
When replacing the palm rest, the solid-state drive holder, and the touchpad bracket must to be removed from the
existing palm rest and transferred to the replacement palm rest.
Installing the palm-rest and keyboard assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Place the palm-rest and keyboard assembly on a flat surface.
NOTE:
When replacing the palm rest, the solid-state drive holder must be transferred from the old palm rest to the
replacement palm rest.
58
Removing and installing components