manualshive.com logo in svg

Dell G16 7620, Service Manual, Page: 44 / 79

Share
Download
Dell G16 7620 Service Manual Download Page 44

6. Touchpad cable
7. Keyboard-controller board cable
8. Left-fan cable
9. Power-button cable

The following image indicates the location of the system board and provides a visual representation of the removal procedure.

Steps

1. Remove the two (M2x4) screws that secure the Type-C bracket to the system board and lift the bracket off the system

board.

2. Peel the tape that secures the display-cable connector latch to the system board.
3. Open the latch and disconnect the display cable from the system board.
4. Disconnect the DDS (Dynamic Display Switch) cable from the system board.
5. Disconnect the power-adapter port cable from the system board.
6. Peel the power-adapter port cable off the system board.
7. Disconnect the right-fan cable from the system board.
8. Remove the two screws (M2x2) that secure the right fan to the palm-rest and keyboard assembly.
9. Disconnect the speaker cable from the system board.
10. Open the latch and disconnect the touchpad cable from the system board.
11. Open the latch and disconnect the keyboard-controller board cable from the system board.
12. Disconnect the left-fan cable from the system board.
13. Open the latch and disconnect the power-button cable from the USB board.
14. Remove the four screws (M2x4) that secure the system board to the palm-rest and keyboard assembly.
15. Remove the screw (M2x2) that secures the system board to the palm-rest and keyboard assembly.
16. Lift the system-board assembly off the palm-rest and keyboard assembly.

44

Removing and installing components

Summary of Contents for G16 7620
















































































Reviews:

No comments